ZOOP VYPER
#

Review Log book

start time

1Press the MODE button to open up the dive modes menu.

2

2Quickly press the MODE button again within 1 second to navigate through the menu until you reach memory logbook.

3

2Quickly press the MODE button again within 1 second to navigate through the menu until you reach memory logbook.

5

2Quickly press the MODE button again within 1 second to navigate through the menu until you reach memory logbook.

log start

3The computer will show information about your last dive over 3 screens. This first screen shows your max-depth, time & date, Nitrox mix and dive time. The “N” tells you that you’ve done a dive in nitrox mode and below the number of repetitive dives in that mode will be shown. Press the SELECT button to see the next screen

8

4This screen shows maximum depth, surface time, average depth, the consumed pressure (if enabled) and the Oxygen Limit Fraction. Press the SELECT button to see the next screen.

mem1

5The third screen shows water temperature, tank pressure (if enabled) as well as a graphical dive profile. Press the UP button repeatedly to play through the dive. You can hold the UP button to fast forward, which can be stopped by pressing the UP button again.

mem2

5Press the UP button until you reach the end of the dive.

mem3

5Press the UP button until you reach the end of the dive.

mem4

5Press the UP button until you reach the end of the dive.

mem5

5Press the UP button until you reach the end of the dive.

mem6

6Press the SELECT button to return to the first screen for this dive.

7

7To navigate to the next dive in the logbook, press the UP button.

10

8To navigate to the next dive in the logbook, press the UP button.

11

9Press the UP button again to navigate to the next dive.

12
Back to Menu
☰